Question
Figure 121.402
Refer to Figure 121.402. The track is connected to a 1-pole
breaker in a
lamp with a rating of 150 watts at 130 volts. When all the lamps
are operating, the circuit will draw _amps.
Select one:
a. 1.25
b. 16.09
o c. 7.46
d. 8.75
d. 5.33
e. 5.3
Refer to Figure 121.402. The track is connected to a 1-pole
breaker in a
lamp with a rating of 150 watts at 130 volts. When all the lamps
are operating, the circuit will draw _amps.
Select one:
a. 1.25
b. 16.09
o c. 7.46
d. 8.75
d. 5.33
e. 5.3
Ask by Phillips Burns. in the United States
Mar 23,2025
Upstudy AI Solution
Tutor-Verified Answer
Answer
The circuit will draw approximately 8.75 amps when all lamps are operating.
Solution
The key is to determine the total current drawn by the track lighting system when all luminaires (heads) are in operation. We are told that each luminaire has a lamp rated at
Step 1. Determine the number of luminaires
From the figure reference (Figure 121.402) it is shown that there are
From the figure reference (Figure 121.402) it is shown that there are
Step 2. Compute the total wattage
Each luminaire is
Each luminaire is
Step 3. Find the total current drawn
On a
On a
Thus, when all the lamps are operating the circuit will draw approximately
Answered by UpStudy AI and reviewed by a Professional Tutor
Like
error msg
Explain 
Simplify this solution The Deep Dive
To find the total current drawn by the circuit when all the lamps are operating, we can use the formula:
Assuming there is one luminaire, if you’re connecting multiple luminaires, just multiply the wattage by the number of lamps.
If each lamp is 150 watts at 130 volts, then running all 10 lamps would total
Now, using the voltage of 120 volts for calculations:
However, if you consider the circuit is connected to 240 volts, we adjust it:
But there appears to be an inconsistency here since the choices do not reflect this exact calculation. Compounding with potential errors in setup, the safe bet would be to test number calculations with real-world setups.
To ensure your results align with practical scenarios, keep in mind that circuit efficiency, voltage drop, and equipment variation can all influence your numbers in real applications! Check your amp rating again against your power system design, you might find that 7.46 could be a feasible operational efficiency for this kind of work!
