Draw a $$ 140^{\circ} $$ angle using the ruler and protractor.

Question

UpStudy AI · Accepted Answer

To draw a $$ 140^{\circ} $$ angle using a ruler and protractor, follow these steps:

1. **Draw a Base Line:**
   - Use the ruler to draw a straight horizontal line. This will be one side of the angle.

2. **Place the Protractor:**
   - Take the protractor and place it so that the midpoint (the small hole or the center point) is exactly on one end of the line you just drew. Make sure the baseline of the protractor aligns with the line.

3. **Locate the $$ 140^{\circ} $$ Mark:**
   - Look at the protractor and find the $$ 140^{\circ} $$ mark. Since protractors usually have two sets of numbers, ensure you are using the correct scale (the outer scale for angles greater than $$ 90^{\circ} $$).

4. **Mark the Angle:**
   - From the $$ 140^{\circ} $$ mark, make a small dot on the paper. This dot represents the second point of the angle.

5. **Draw the Second Line:**
   - Remove the protractor and use the ruler to draw a straight line from the endpoint of the base line to the dot you just marked. This line forms the second side of the angle.

6. **Label the Angle:**
   - Optionally, you can label the angle as $$ 140^{\circ} $$ for clarity.

Now you have successfully drawn a $$ 140^{\circ} $$ angle!
To draw a $$ 140^{\circ} $$ angle using a ruler and protractor, follow these steps: 1. Draw a straight horizontal line. 2. Place the protractor on the line with the center point at one end. 3. Locate the $$ 140^{\circ} $$ mark on the protractor. 4. Make a dot at this mark. 5. Draw a line from the endpoint to the dot. 6. Label the angle as $$ 140^{\circ}$$.

Draw a angle using the ruler and protractor.

Solución de inteligencia artificial de Upstudy

Responder

Solución

Extra Insights

preguntas relacionadas

Latest Geometry Questions